Back to UVC CLEAN AIR

AIRSTREAM GF UVC 2 X 30W

Download PDF
AIRSTREAM GF UVC 2 X 30W AIRSTREAM GF UVC 2 X 30W
Previous
Next
LIGHT TECHNOLOGY
UVC
Height:
350mm
Width:
350mm
Length:
1236mm
Recommended floor space:
10 up to 20m²
Recommended room volume:
From 25 up to 50m³
Voltage:
220...240V/50...60Hz
Air flow rate:
70m³/h
System Power:
60W + Ballast
Noise floor:
From 38 up to 40dB
UVC emitters:
2 X 30W
Emitters service life:
9000h
Protection rating. Class:
IP20 , I
Material:
Steel sheet
Colour:
White
Height: 350mm
Width: 350mm
Length: 1236mm
Recommended floor space: 10 up to 20m²
Recommended room volume: From 25 up to 50m³
Voltage: 220...240V/50...60Hz
Air flow rate: 70m³/h
System Power: 60W + Ballast
Noise floor: From 38 up to 40dB
UVC emitters: 2 X 30W
Emitters service life: 9000h
Protection rating. Class: IP20 , I
Material: Steel sheet
Colour: White
DETAILS
Next
DETAILS

APPLICATION
UVC Clean Air Technology

  • MANUFACTURER
  • BARO
  • COUNTRY OF ORIGIN
  • SPAIN
AIRSTREAM GF UVC 2 X 30W

Bactericidal luminaire produced in the plant, which is the only one in Poland, it has a quality management system for production Medical Devices ISO 13485 - design certificate and making lighting fittings for medical use. Luminaire with forced air circulation, designed for T8 fluorescent lamps and adapted for wall mounting. This is a luminaire that has an internal closed and sealed chamber for disinfection and the whole process takes place thanks to the air flow. The high-quality housing does not draw air through the gaps but its the oblique design prevents dust from forming during horizontal work position. In addition, the housing is protected with an antibacterial coating. Ignition ballast placed in a separate and sealed chamber protected against the ingress of dust that may cause negative effects such as short circuit on the housing. The components used are UV-resistant: covered lampholders, power supply, cords and fan. Air inlet equipped comes with a replaceable filter to prevent dust from entering inside the luminaire. Filter replacement is carried out without necessity opening the entire luminaire. Built-in industrial fan in the outlet with ball bearings. Two variants of the air inlet: 1) inlet on the front together with the air outlet grille (F); 2) inlet together with a filter on the side end cap which ensures greater efficiency devices (S). Due to the fact that the entire disinfection process takes place inside housing, it is completely safe and recommended for work in rooms where it must be at the same time with working staff.

Contact us to help you choose the right lighting solutions for you
CONTACT FORM